• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into frames of the past easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need to locate some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from entering the property until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap is large, you may think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window to access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen. Most often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and do a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

It is crucial to act if you awake each day to discover mouldy walls and wet floors. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature within your home. Most of the time, UPVC Window Repairs uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue the caulking that was used up may require removal before a fresh layer can be put on. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage is occurring between the double glazing repair-glazed glass, it is more likely that the problem is with the seal rather than the frame. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens in the breeze. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also decreases the risk of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also be disaligned as a result of wear, causing an opening where the sash and frame meet. This can be easily repaired by giving them good clean, but if they are beyond repair it might be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, may be misaligned. Again, it's possible to just give them a thorough clean, however in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts is window seals, these can become worn down or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and they may reach the point when it's more economical to replace them than repair them. If you are having issues with your upvc windows, it's best to seek professional assistance as soon as possible.