• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to replace a broken window handle with the proper tools. But it's essential to know your type of handle and its spindle's length prior buying an alternative.

Older uPVC window handles have a spur that protrudes and locks on a cockspur wedge striker. They can be left or right-handed and must be to match when replacing.

What kind of lock or handle do you have? I have?

There are a variety of upvc window locks and handles, each with its own advantages and purposes. The type of handle that you choose will determine if your locking mechanism is effective and also if it is simple to open the windows. As time passes, and with regular use the handles made of upvc on your windows can be damaged and worn out. This makes them less secure and effective. In certain instances, they might even fall completely off. If you find that your window handles have fallen off, it's essential to fix them as soon as possible. This will prevent potential break-ins and keep your home safe.

It's a task that almost anyone can do. You will need some basic tools, but with the appropriate knowledge, it's a straightforward process that should only take a few minutes. To begin, you will need to determine the type of lock and handle that you have on your window and then to find the ideal replacement windows prices.

Inline Espagnolette Handles

These are the most commonly used kind of upvc handle and UPVC Window Handle Replacement are usually located on the side of your window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles feature a spindle that runs through the middle of the handle to the window frame in order to control the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are secured to the frame of the window by a single screw and are less secure than other kinds of window handle.

Handles that tilt and turn

The tilt and turn handles are different from other upvc handles because they can be rotated to open the window and then tilted to the window to let air circulate. They feature a 7mm spindle at the back and are available both in left and right-handed versions.

It is important to measure the spindle's size prior to purchasing a new upvc handles. Not all of them are exactly the same size. To test the length of your handle made of upvc, simply drop something into the middle of the hole and then measure how far it extends before it comes into contact with an obstruction. This is the maximum spindle size that will fit into your windows.

What is the spindle?

uPVC window handles operate similar to doors, by turning the handle to operate a latch inside the frame. This opens the window to allow it to be opened and closed. The handles could be damaged, especially if they're used frequently or subjected to harsh conditions. It is possible to replace the handles on your uPVC window if they are not functioning properly.

There are many types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle type uses an entirely different spindle for locking the window mechanism. It is essential to determine the kind of handle that is installed on your uPVC windows so that you can replace it with a suitable one.

You can check what type of uPVC handle you have by looking at the base section of your handle. A snap-in covers should be over the screw that holds the base of the handle in position. Remove this and then you should be able see the second holding screw located at the opposite end of the base of the handle. Once both screws are removed you should be able to pull the handle away from the uPVC window.

After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Make note of the length of the spindle since you will need to ensure that you buy an alternative that is the same length as your original handle and locking mechanism.

The primary issue with uPVC window handle problems is that the handle spindle gets worn out and cannot longer operate the locking mechanism. This can be caused by corrosion, damage caused by continuous use, or even the locking mechanism becoming looser. If this occurs, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I take off the handle that was previously attached?

Window handles can be damaged or broken over time. It is important to fix them as soon as you can to ensure your security. Fortunately, replacing a damaged or worn handle is a fairly simple job that can be carried out in just over an hour and doesn't require any specialist tools.

The first step to remove the handle that was previously used is to remove the screw that is located at the top of the base of the handle. Once this is removed the handle can then be removed from the base section. A second screw will be situated at the base of the handle. This too can be removed. Once these two screws have been removed, the handle will be removed from the base of the window.

After the handle has been removed, grab the new handle and line up the fixing holes with the holes that are present in the window frame. If there is a sticker or cap on the new handle remove it if required and put the handle back in the appropriate position. Once the handle is set, it is essential to check that it is working by turning the handle and making sure that the lock mechanism is activated.

Espag handles feature spindles that protrude out of the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows feature an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over either the outer frame or the transom bar cross member within the window.

Once you have the new handle in place, slide the spindle inside the lock inside the window and then tighten it down. Replace the snap-in cover and screw cap (if applicable) after the handle has been firmly fixed. The handle is now ready to use by opening and closing the window a few times to make sure that it functions correctly and securely.

How do I put in the new handle?

Changing your uPVC window handle isn't a big deal and the process is simple. All you need is a screwdriver and a bit of perseverance. First, make sure that the old handle is unlocked. Then remove any screws visible. You could also replace them with screw caps. Once the handle is removed it is necessary to take a note of the length of the spindle that protrudes from the back of the handle. This is vital because it will determine the type of handle you need to purchase.

Espagnolette handles that are made of uPVC are the most popular kind of handle. They have a spindle which runs through the handle and operates an internal locking mechanism within the frame of the window. The handle opens the latch, allowing the window to open. In regular use and time, handles made of espagnolette can become damaged.

Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They feature an extended blade that works a multipoint locking mechanism within the window. They are generally more secure than handles made of espagnolette because they are only accessible from the inside. You can replace them with the same method as you would with espagnolette handles however, ensure that the new handle is not angled and flat.

Once you have selected the correct handle, simply align the new handle with existing screw holes prior to fixing it with screws. Then, put the screws on and test your new handle. This is done by moving the handle from locked position to the unlocked and vice versa several times. It is possible to contact an expert to see how you can fix any problems. They can often advise you on the best solution to solve the issue in a speedy and efficient manner.