• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It is easy to repair a damaged window handle with the proper tools. But it's essential to know the handle's type and spindle's length prior buying an alternative.

Older uPVC windows have cockspur window handles which have an extension spur that can the lock of a wedge cockspur striker plate. These can be either left or right-handed and need to be matched when replacing.

What kind of lock and handle do I need?

There are many different types of window handles made of upvc and UPVC Window Handle Replacement locks, each having their own benefits and purposes. The type of handle you are using will determine how easy it is to open your windows and whether or not the locking mechanism works as intended. With time and regular usage, the window handles made of upvc are prone to wear or damage. out, making them less secure and effective. In some instances, they could even fall off completely. It is essential to fix your window handles made of upvc as soon as you begin to notice them falling off. This will stop possible burglaries, and keep your house secure.

It's an easy task that almost anyone can do. With a few basic tools and the proper knowledge it's a straightforward process that shouldn't take less than a few minutes. You will need to know the type of handle or lock that you have on your window. This will help you select the right replacement.

Inline Espagnolette Handles

These are the most common type of upvc handles and are usually located on the side of your window. They are flat in design and come with a latch that connects to the locking mechanism of the frame of the window when it is turned. Inline upvc handles also have a spindle that goes through the middle of the handle and then into the window frame to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are fitted with a single screw that secures the handle to the frame and are not as secure as other types of window handles.

Tilt and Turn Handles

As opposed to the other handles made of upvc the tilt and turn handles can both be rotated to open the window and turned inwards to allow to let air flow in. They have a 7mm spindle in the back and are available in left and right-handed versions.

When you are purchasing replacement handles for upvc, it is important to verify the length of the spindle because not all handles are the same size. Drop something in the middle of the hole to test the length. This is the largest spindle size that will fit in your windows.

What is a spindle?

uPVC window handles work similarly as doors. By turning the handle, you can operate a latch within the frame. This unlocks the window to allow it to be shut and opened. The handles can become damaged, especially if often used or are exposed to harsh environments. This could mean that you have to replace your uPVC handles for windows as they might not operate the window correctly in the future.

There are several different types of uPVC handles available including Espag, Cockspur and Spaded handles. These handles are designed to fit in the uPVC frames in various ways and each handle type utilizes a specific spindle to lock the mechanism into the window. This is why it is important to know what kind of handle is installed on your uPVC window to get the correct replacement for it.

You can determine the type of uPVC handle you are using by taking a look at the base of the handle. A snap-in cover should be over the screw that holds the base of the handle in position. When you remove this cover you will be able to see the second screw that holds the base of the handle in place. Once both screws have been removed, you should be able take the handle out of the uPVC.

Once you have removed the uPVC window handle you need to carefully remove the old spindle from the locking mechanism. Take note of the length of the spindle. You'll need to buy a replacement of the same length as the original handle and locking device.

The spindle wears down and cannot operate the locking mechanism. This could be due to corrosion, damage due to continuous use, or even an unreliable locking mechanism. If this happens, it is required to replace the window handle as well as the locking mechanism to restore the full functionality to your uPVC windows.

How do I remove the handle that was previously attached?

Through time and regular use, window handles may become damaged or broken and if this happens, it is crucial to repair them as soon as possible to ensure the safety of your home. The good news is that replacing a damaged or worn handle is a easy task that can be completed in just over an hour and doesn't require any special tools.

To remove the handle, you first need to remove the screw at the base of the handle. Once the screw is removed, the handle will be removed from the base. There will be another screw located at the bottom of the handle base, and it can be removed as well. After the two screws are removed, the handle can be detached from the glass window replacement's base.

After the handle has been removed, grab the new handle and align the fixing holes with the holes that are currently in the window frame. If there is a sticker or cap on the new handle remove it if necessary and then screw the handle in place. Once the handle is in place it is important to test whether it functions by turning the handle and making sure that the lock mechanism activates.

Espag handles come with a spindle that protrudes from the handle and slot into a multipoint locking mechanism inside the window frame. Cadenza windows feature blades with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over the frame's outer or transom bar cross-member inside the window.

Once you have installed the new handle, insert the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle is securely fixed. The handle is now ready for use by opening and closing the window a few times to make sure that it is working properly and securely.

How do I install the new handle?

It's not difficult to alter the handle on your Upvc windows. The process is very easy. You'll need an screwdriver and a little bit of patience. First, ensure that the handle that you are replacing is unlocked. Then remove any screws that are visible. You could also replace them with screw caps. After removing the handle you will need to note the length of the spindle which extends from the back. This is important as it will determine the kind of handle that you will need to buy.

Espagnolette handles are the most popular type of handle used on uPVC windows. They have a spindle that is inserted into the handle, and is responsible for a locking mechanism inside the window frame. When the handle is turned, it releases the latch on the window and allows it to open. With time and regular use, espagnolette handles may be damaged or damaged and it is necessary to locate an alternative.

Cadenza handles are a type of uPVC handle that is commonly employed with tilt and turn windows. They feature an extended blade that works a multipoint locking mechanism within the window. They are generally more secure than espagnolette handles since they are only accessible from the inside. They can be replaced by the same method as espagnolette handles but you should ensure that the new handle has a curved blade, as opposed to one that is flat.

After you have picked the correct handle, you can align the new handle with the existing screw holes before fixing it with screws. Then, put the screws on and test the new handle. You can perform this by dragging the handle back and forth from the locked position to the unlocked for a few times. It is possible to contact an expert to see if you can resolve any problems. They are often able to advise you on the best way to resolve the issue in a fast and effective way.