• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

It is essential to clean and oil UPVC windows and UPVC Window Repairs doors on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and generally fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need source some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you are going to try to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your property until a professional comes out to repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. In time, Upvc Window Repairs they could be affected by a variety of issues that include sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window to access the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, tighten the screws to ensure they remain in the right place.

If you can't reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it can also be caused by the handle mechanism getting worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and do an experiment fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the problem is, the old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window replacement. In more serious situations, you may have to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open in a breeze it could be hinges at fault. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. It is an easy process but it can be easier when you have a person to assist in holding the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be pleased to offer you suggestions.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become unbalanced due to wear, which can cause an opening where the sash and frame meet. If they're beyond repair, it could be necessary to have them realigned. The interlock may be misaligned. This is located on the hinge side and might require to be cleaned. In some cases it might be necessary to replace these.

The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as possible.