• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum or timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation you'll need to source some plastic spacers that will help the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

It's a great idea tape the gap once the glass has been removed. This will prevent drafts and water from entering your home until a professional arrives to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window to get to the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you're happy with the fit, tighten the screws until they stay in the right place.

If you can't reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. Often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need close the window and then perform an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if you wake up every morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking might need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window more difficult to clean and reduce its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is more related to the seal, not the frame. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze, it may be hinges at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's very simple to change a window hinge but it's much easier if someone else helps hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused either by opening the window improperly or a faulty installation in the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you suggestions.

It is also essential to grease the hinges regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window doctor near me.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges can also be misaligned due to wear, creating gaps where the sash and frame meet. They can be repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to have them aligned or replaced. The interlock, which is located on the hinge side of the window, can also become misaligned, again it's feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

The next common reason for draughts are the window seals. They can become worn down or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor window temperatures and again will reduce the possibility of draughts.

One of the most effective ways to reduce draughts is by using a draught excluder. These are usually fabric tubes filled with some sort of filler and can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to realize that all windows have a lifespan and there may come an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your upvc window, it's best to consult a professional immediately.