• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. However If you have double-pane windows that are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not on the floor, where they could be trampled under.

It's a great idea cover the gap with tape after the glass has been removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they may be afflicted by a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can access the frame. With a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and check for installing an appropriate fit. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and perform an initial fitting. The corners of the sash should align with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do can not only cause degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on how serious the issue is, old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage originates from the glass in your double glazing near me glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease it could be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window, but it's easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to offer suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges may also become disaligned as a result of wear, which can cause an opening where the sash and frame meet. This can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to get them aligned or replaced. Second, the interlock can be misaligned. This happens on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking cold air.

With a little maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as possible.