• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace windows, and the new one will usually fit inside the frame of the previous one easily. However If you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the glass panes yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they can be trampled on and cause further damage.

It's a great idea seal the gap after the glass is removed. This will keep drafts and water from entering your home until a professional is able to repair the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time, they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to unblock the windows so you can get at the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, Window Repairs shut your window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws until they stay in position.

If you aren't able to move the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and then perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if wake up every morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer can be put on. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is related to the seal, not the frame. This can be easily corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it blows open with a breeze. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier to do with someone else to help hold the frame in place.

Make sure that the uPVC hinges are open and closed in the proper direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. This can often be resolved by sending us a photo on our website. We will be pleased to offer you suggestions.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also lower the risk of a window sticking and help prevent corrosion. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become misaligned due to wear, causing an opening where the sash and frame meet. If they are beyond repair, it may be necessary to have them realigned. The interlock, which is on the hinge side of the window, may also become misaligned, again it is possible to just give them a clean but in certain cases, it may be necessary to have them replaced.

The next common reason for draughts is window repairs seals, these are prone to wear or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will reduce draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and they may reach a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.