• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly upvc window repairs windows and doors is essential. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If windows with double glazed window repairs near me panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need to locate some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is large, you might be interested in the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sliding. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window to get to the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and Upvc Window repairs adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in position.

If you cannot reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it could be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close your window and do an experiment to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is crucial to take action if you awake each day to discover mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal than the frame. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze It could be hinges that are at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to change a window hinge but it's much easier if someone helps hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for upvc window repairs the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be pleased to offer you advice.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, which can cause gaps where the sash and frame meet. These can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window and can be misaligned. Again, it is feasible to give them a clean but in some cases it might be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the possibility of draughts.

One of the most effective ways to reduce drafts is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be put on the top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.