• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window repairs frame.

If you are going attempt to remove the window panes by yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap is large, you may be interested in a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action immediately if you notice your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows to get at the frame. After that, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fit. If you're happy with the fit, tighten the screws to ensure that they remain in position.

If you can't reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be done by any DIYer who is competent. Depending on how severe the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens with an ease. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to change a window hinge, but it's simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of improper installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also lower the chance of windows getting stuck and stop corrosion. The ideal time to do this once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. First, the hinges because of wear and tear, could become misaligned. This causes gaps to develop between the sash and the frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, may be misaligned. Again, it may be feasible to give them a clean but in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals. These are prone to wear or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use a draught excluder. These are usually fabric tubes filled with some sort of filler and can be placed on the top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it may be cheaper to replace them rather than repair them. If you encounter any issues with your window made of upvc, it's best to consult a professional as soon as possible.