• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to take out the existing panes and install new ones. In this instance you'll need locate some plastic spacers that help the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action as soon as you notice your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can get to the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for fitting. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and perform an experiment fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are difficult to open, or are loose and blow open with ease It could be hinges at fault. These are easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It's easy to replace a hinge on a window however it is easier if someone else helps you to hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. This can be done by checking for the arrows on each hinge, this shows which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to give assistance.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the possibility of a window sticking and help prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, may become displaced, which can cause gaps to develop where the sash joins the frame. These can be easily fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to get them aligned or replaced. The interlock, which is on the hinge side of the window, may also be misaligned, and again it is feasible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They will help keep cold air out and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them than to repair them. So, if you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.