• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. However when you have double pane windows that are held in place by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need to find some plastic spacers that help the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window repair panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, over time they can suffer from a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act when you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need to open the window to access the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the fitting. If you're happy with the fit, tighten the screws until they stay in place.

If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Most often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and then perform an experiment fitting. The corner joints of the sash must align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks from windows not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk can be put on. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan is properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. Again this can easily be repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it blows open with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It is very easy to change a window hinge but it's much easier if someone helps you hold the frame.

Verify that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be happy to give you advice.

It is also important to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be misaligned due to wear, which can cause gaps where the sash and frame meet. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it could be necessary to have them aligned or replaced. The interlock may also become misaligned. This happens on the hinge side and may need to be cleaned. In some instances it is possible to replace these.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it could be cheaper to replace them rather than repair them. So, if you are having issues with your upvc windows, it is best to seek professional assistance as soon as possible.