• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into frames of the past easily. If windows with double glazed window repairs panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance, you will need to find some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sagging. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to access the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows are watertight and safe from drafts.

uPVC handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to shut the window and do an experiment fitting. The corners of the sash must align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze, it may be hinges at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical component hinges will be damaged over time. The process of replacing a hinge on a window is essentially a very simple process but it can be simpler when you have a person to help hold the frame in place.

Check that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window incorrectly or a faulty installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to provide suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also decreases the chance of windows sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. The hinges can also be misaligned due to wear, which can cause an opening where the sash meets frame. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it's possible to just give them a clean but in some instances it could be necessary to get them replaced.

The second most frequent cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is crucial to recognize that all windows have a lifespan and they may reach the point when it's more cost-effective to replace them rather than fix them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as possible.