• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum or timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However when you have double glazed window repairs pane windows that are anchored by internal beading it will be more difficult to remove the old panes and put in new ones. In this situation you'll need to source some plastic spacers to assist the new pane to fit properly into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass so that any shards fall onto the fabric instead of onto the floor where they can be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the distance between the door and the window is substantial, you may need to consider security screens that includes an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they are susceptible to a range of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's crucial to act when you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and test it for fitting. If you're satisfied with the size of the window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and then perform an initial fitting. The corners of the sash must align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a relatively easy fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes do not have debris inside them and that the sill pan has been angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease, it may be hinges at the fault. They can be easily replaced by any competent DIYer and are usually completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It is an easy process but it can be easier to do when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The problem with the hinges on windows could be caused by improperly opening the window in a certain manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become misaligned due to wear, causing gaps where the sash meets frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could be misaligned. It is located on the hinge's side, and could require to be cleaned. In some instances it might be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes filled with some sort of filler and can be placed on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repairs, your upvc windows will provide an excellent level of security and insulation for your home. It is crucial to realize that windows last for a certain period of time and they may reach the point when it's more economical to replace them than fix them. If you encounter any issues with your Upvc window, it's best to consult a professional immediately.