• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. However, if you have double-pane windows that are secured by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance you'll need source some plastic spacers that help the new pane to fit correctly into the window frame.

If you are going to try to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will prevent water and drafts from entering your home until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you might think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your upvc window repair window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window to get to the frame. With an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, tighten the screws to ensure they stay in position.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is essential to act if you awake each day to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze, it may be hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is essentially a very simple procedure, but it is easier to do when you have a person to assist in holding the frame in place.

It is also important to ensure that the upvc window repairs near me hinges are opening and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be pleased to offer you advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become unbalanced due to wear, creating a gap between the frame and sash. They can be fixed by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it is possible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next common reason for draughts are the window seals. These are prone to wear or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. However, it is important to recognise that windows last for a certain period of time and there may come an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional as soon as possible.